trungputin2003
-
Số lượng nội dung
20 -
Đã tham gia
-
Lần ghé thăm cuối
Bài đăng được đăng bởi trungputin2003
-
-
Bác PhamThanhBinh ơi, em có đường 1 pline gồm n đoạn em muốn tick vào pline thì sẽ xuất chiều dài của n đoạn đó sang Exel được không ạ? Nhờ Bác viết giúp cho cái lisp nhé. Cảm ơn Bác.
-
Bác Tuệ dạo này bận quá rùi, khi nào có time Bác xem cho em với nhé, em rất cần. Thanks!!!!
-
Không biết có Bác nào gúp em dc không nhỉ!
-
Công suất 114.000 m3/d là lớn đấy. Mình thấy bạn chọn 2 bể lắng, cả bể tiếp xúc nữa ... không biết ý đồ dây chuyền công nghệ thế nào nhỉ???
-
Mình thấy có khác.
1: Dung lượng cùng 1 bản vẽ thì DXF lớn hơn DWG
2: Các phần mềm tương thích như Microsation, map, Epanet... thường xuất ra dạng dxf
mình thì chỉ ứng dụng đến đấy nên chỉ biết đến đó. Chắc sẽ còn nhiều cái khác nữa mà mình ko biết, ai biết thì cho anh em thêm thông tin hiểu thêm.
-
Thực ra bản vẽ nắp ga Gang mình có nhưng lại kiểu khác nếu dùng mình up cho mọi người.http://www.cadviet.com/upfiles/3/77861_cp2wwtpc150__p05.dwg
-
Ui mình giờ mới tham gia CV, bạn Khuyên chắc chuyển nghề rồi cũng nên. Nếu vẫn cần các tài liệu thì mình gửi lên cho.
-
Đây Bác Tuệ ơi. Nhờ Bác xem qua cho cái, đang cần quá. Cảm ơn Bác nhiều nha. http://www.cadviet.com/upfiles/3/77861_att.dwg
-
Em nhờ các bác giúp em cái lisp chuyển text att thành block att và giữ đúng nội dung text: Em có rất nhiều text dạng att, giờ em muốn chuyển mỗi text đó thành 1 block att và vẫn giữ đúng nội dung ( kiểu 100 text att sẽ chuyển thành 100 block att nội dung của từng text vẫn giữ nguyên khi chuyển sang block att).
-
Sao của em nó không có cái convert ấy nhỉ
Regenerating model.AutoCAD Express Tools Copyright © 2002-2004 Autodesk, Inc.AutoCAD menu utilities loaded.Command: l LINE Specify first point:Specify next point or [undo]:Specify next point or [undo]:Command: LINE Specify first point:Specify next point or [undo]:Specify next point or [undo]: *Cancel*Command:Command: *Cancel*Command: Specify opposite corner:Command:Command: *Cancel*Command: overkillInitializing...Select objects: 1 foundSelect objects:Command:Command: *Cancel*Command:Command:Command: _plotSpecify window for printingSpecify first corner: Specify opposite corner:Automatic save to C:\Users\TRUNGP~1\AppData\Local\Temp\Drawing1_1_1_0041.sv$ ...Command:Command: *Cancel*Command: *Cancel*Command: spl SPLINESpecify first point or [Object]:Specify next point:Specify next point or [Close/Fit tolerance] <start tangent>:Specify next point or [Close/Fit tolerance] <start tangent>:Specify next point or [Close/Fit tolerance] <start tangent>:Specify start tangent:Specify end tangent:Command:SPLINESpecify first point or [Object]: *Cancel*Command: *Cancel*Command: s*Cancel*Command: ap APPLOAD wp_pw.lsp successfully loaded.Command:Command:Command: wpChon doi tuong can thay doi do day (Width) !Select objects: 1 foundSelect objects:Do rong polyline <0.05>: 1Object selected is not a polylineInvalid window specification.; error: Function cancelledSpecify first corner:Invalid window specification.Specify first corner: Specify opposite corner: Select polyline or [Multiple]:Object selected is not a polylineSelect polyline or [Multiple]:Select polyline or [Multiple]:Select polyline or [Multiple]:Select polyline or [Multiple]: *Cancel*Command: *Cancel*Command: *Cancel*Command: wpChon doi tuong can thay doi do day (Width) !Select objects: 1 foundSelect objects:Do rong polyline <1.0>:Object selected is not a polylineInvalid window specification.; error: Function cancelledSpecify first corner: *Cancel*Command: *Cancel*Command: *Cancel*Command:Command: *Cancel*Command: pl PLINESpecify start point:Current line-width is 0.0000Specify next point or [Arc/Halfwidth/Length/Undo/Width]:Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]: *Cancel*Command: wpChon doi tuong can thay doi do day (Width) !Select objects: 1 foundSelect objects:Do rong polyline <1.0>:Unknown command "W". Press F1 for help.1.000000Unknown command "WP". Press F1 for help.Command:Command:Command:Command: _propertiesCommand: *Cancel*Command: *Cancel*Command: wpChon doi tuong can thay doi do day (Width) !Select objects: 1 foundSelect objects:Do rong polyline <1.0>: 10Unknown command "W". Press F1 for help.10.000000Unknown command "WP". Press F1 for help.Command:Command: *Cancel*Command: pe PEDIT Select polyline or [Multiple]: mSelect objects: 1 foundSelect objects:No valid objects selected.Select polyline or [Multiple]: Select polyline or [Multiple]: *Cancel*Command: pe PEDIT Select polyline or [Multiple]:Object selected is not a polylineSelect polyline or [Multiple]:Object selected is not a polylineSelect polyline or [Multiple]:Object selected is not a polylineSelect polyline or [Multiple]:Object selected is not a polylineSelect polyline or [Multiple]: *Cancel*Command: *Cancel*Command:Automatic save to C:\Users\TRUNGP~1\AppData\Local\Temp\Drawing1_1_1_0041.sv$ ...Command: *Cancel*Command: *Cancel*Command:Command: *Cancel*Command: *Cancel*Command: *Cancel*Command: *Cancel*Command: *Cancel*Command:Command:Command:Command: _splineditEnter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: *Cancel*Command: *Cancel*Command:Command:Command:Command: _copy 1 foundSpecify base point or [Displacement] <Displacement>: *Cancel*Command: *Cancel*Command:Command: *Cancel*Command:Command:Command:Command: _splineditEnter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: MSpecify new location or [Next/Previous/Select point/eXit] <N>: *Cancel*Command:Command:Command:Command: _splineditEnter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: *Cancel*Command:Command:Command:Command: _splineditEnter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: REnter a refine option [Add control point/Elevate order/Weight/eXit] <eXit>: wSpline is not rational. Will make it so.Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <N>:100Enter new weight (current = 100.0000) or [Next/Previous/Select point/eXit] <N>:Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <N>:1000Enter new weight (current = 1000.0000) or [Next/Previous/Select point/eXit] <N>:Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <N>:Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <N>:Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <N>:Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <P>:Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <P>:Enter new weight (current = 1.0000) or [Next/Previous/Select point/eXit] <P>:*Cancel*Command: *Cancel*Command:Command: *Cancel*Command:Command:Command:Command:Command: _splineditEnter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: REnter a refine option [Add control point/Elevate order/Weight/eXit] <eXit>:*Cancel*Command: *Cancel*Command: splineditSelect spline:Command:SPLINEDITSelect spline:Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: *Cancel*Command:SPLINEDITSelect spline:Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]:Command:SPLINEDITSelect spline:Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]:Command:SPLINEDITSelect spline:Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]:Command:SPLINEDITSelect spline:Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: -
các Bác mà in ra PDF thì chết, các Bác làm cach này theo em!
ctrl+P, chọn printer DWF6 eplot.pc3 lưu file dang đuôi .dwf
In ra nét như in cad vừa nhẹ vừa nét, chứ in ra PDF thì chán lắm.
-
Cảm ơn 2 bác pphung và cancer-xd em làm đc rồi. Chúc các anh chị sức khoẻ và nhiều sáng tạo giúp cho cadviet ngày càng có nhiều bài hay. Rất cảm ơn!
-
nhờ các Bác giúp em với.
Em đang có vấn đề là:
Bản vẽ em có rất nhiều text em muốn xuất các text này sang Excel để sửa cho nhanh, sau đó nhập lại vào cad các text mới này thay text cũ (các text vẫn đúng vị trí nhưng thay đổi giá trị)
Chân thành Cảm ơn các Bác nhiều nha.
-
Phiền Bác Cancer-xd up lại link giúp cái được không, em down không được. Thanks Bác!
-
ui, cảm ơn Bác Tuệ, sáng kiến tuyệt vời đấy. Có lúc đơn gian thế mà em không nghĩ ra. Cảm ơn Bác nhiều nha, tiết kiệm đuọc nhiều thời gian và hết ngại quả Wipeout đường tròn rồi. hehe. Tuyệt đấy!
-
Bác Skying ơi, em muốn xuất cho cả pline (gồm nhiều đoạn pline nối với nhau) thì làm thế nào? ở đây Bác đang làm cho từng đoạn (file cad em gửi kèm) nhờ Bác chỉnh cho cái. Cảm ơn Bác nhiều nha.
-
Bác Skying dân ở mô đó họ? dừ mới tìm ra bác ni hey. Đang có cái cái cần nhờ bácgiuwps cho 1 tay đây!
-
thế muốn Wipeout cho đường tròn thì làm sao các bác nhỉ? Em làm bên Cấp thoát nước, hay đặt các nút tính toán là nút tròn nên rất cần, Em toàn phải làm thủ công là offset ra 1 đường tròn khác rồi vẽ Wipeout theo đường tròn này. Quả này nhờ các Bác bỏ thời gian quan tâm làm cho cái lisp với. Rất cảm ơn các Bác. Chúc sức khỏe mọi người.
-
Em vào Cadviet nhiều, bài của Bác thuộc top đỉnh cao. ngưỡng mộ.nhờ các Bác giúp em với.
Em đang có vấn đề là:
Bản vẽ em có rất nhiều text em muốn xuất các text này sang Excel để sửa các giá trị text này, sau đó nhập lại các text mới này thay text cũ vào cad (các text vẫn đúng vị trí nhưng thay đổi giá trị)
Chân thành Cảm ơn các Bác nhiều nha.
Em đang có vấn đề này nhờ Bác xem giúp cho.Bản vẽ em đang có rất nhiều text em muốn xuất sang Excel để sửa nội dung sau đó nhập lại các text mới này thay cho các text cũ (vẫn đúng vị trí text cũ nhưng nội dung là mới.Nhờ Bác nghiên cứu giúp cho.Cảm ơn Bác nhiều nha.Không biết Bác có nhận được tin nhắn này hay không nên em gửi lại nội dung qua Yahoo cho Bác nhé.
Layout chuyển sang màu trắng tất cả?
trong Sử dụng AutoCAD
Đã đăng · Trả lời báo cáo